
CARACTERÍSTICAS DE LAS Válvulas de Retención
Las válvulas de retención son válvulas de funcionamiento automático, que tienen aplicaciones de seguridad para evitar retornos de flujo. Cuando la bomba no está funcionando, mantienen la línea de tubería llena.
Estas válvulas son unidireccionales, y pueden instalarse de manera horizontal o vertical en la línea.
VENTAJAS COMPETIVAS
- Recorrido mínimo del disco a la posición de apertura total.
- Acción rápida.
Recomendada para
- Cuando hay cambios frecuentes de circulación en la tubería.
- Para uso con válvulas de globo y angulares.
- Para uso cuando la caída de presión a través de la válvula no es problema.

INFORMACIÓN TÉCNICA
RANGO DE FABRICACIÓN ARFLU
tamaño
construcción
extremos
clase asme
normas internacionales
NORMAS DE DISEÑO INTERNACIONAL

DISEÑO Y FABRICACIÓN:
BS 1868: Specification for steel check valves (flanged and butt-welding ends) for the petroleum, petrochemical and allied industries.
ASME B 16.34: Valves-Flanged, Threaded, and Welding End.
API 602: Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries
API 6D: Pipeline Valves. Pressure Test Specification.
API-594: Check Valves: Wafer, Wafer-Lug, and Double Flanged Type
BS-5352, Obsolete, replaced by ISO 15761
ISO 15761: Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries (Equivalent to API 602)
API 602: Steel Gate, Globe and Check Valves for Sizes DN 100 and Smaller for the Petroleum and Natural Gas Industries (Equivalent to ISO 15761)
ENSAYO E INSPECCIÓN:
API 6D: Pipeline Valves. Pressure Test Specification.
API 598: Valve Inspection and Testing.
DIMENSIÓN DE BRIDAS:
ASME B 16.5: Pipe Flanges and Flanged Fittings.
ASME B16.47: large diameter steel flanges: nps 26 through nps 60
MSS SP 44: Steel pipeline flanges
EXTREMOS SOLDADOS O ROSCADOS:
ASME B16.25: Buttwelding ends
ASMEB16.11: Forged fittings, socket-welding and threaded
ASME B1.20.1: Pipe threads general purpose
DISTANCIA ENTRE CARAS:
ASME B 16.10: Face-to-Face and End-to-End Dimensions of Valves.
API 6D: Pipeline Valves. Pressure Test Specification
API-594: Check Valves: Wafer, Wafer-Lug, and Double Flanged Type
* Otras normas/materiales bajo consulta