
CARACTERÍSTICAS DE LAS Válvulas de Bola
Las válvulas de Bola se usan en posición de apertura o cierre, no se recomienda para posiciones intermedias. A diferencia de las válvulas de Compuerta, las válvulas de Bola son válvulas de cuarto de vuelta cuyo elemento de cierre gira muy rápido desde la posición completamente abierta a totalmente cerrada.
VENTAJAS COMPETIVAS
- Bajo costo.
- Alta capacidad.
- Corte bidireccional.
- Circulación en línea recta.
- Pocas fugas.
- Se limpia por si sola.
Recomendada para:
- Para servicio de conducción y corte, sin estrangulación.
- Cuando se requiere apertura rápida.
- Para temperaturas moderadas.
- Cuando se necesita resistencia mínima a la circulación.
- Poco mantenimiento.
- No requiere lubricación.
- Tamaño compacto.
- Cierre hermético con baja torsión (par).º

INFORMACIÓN TÉCNICA
RANGO DE FABRICACIÓN ARFLU
tamaño
construcción
extremos
clase asme
normas internacionales
NORMAS DE DISEÑO INTERNACIONAL

Nuestras válvulas de bola están diseñadas y fabricadas de acuerdo a las siguientes normas internacionales :
DISEÑO Y FABRICACIÓN:
API 6D: Pipeline Valves. Pressure Test Specification.
ASME B 16.34: Valves-Flanged, Threaded, and Welding End.
BS 5351 (substituída por ISO 17292)
API 608: Metal ball valves – Flanged, Threaded, and Welding End
ISO 17292: Metal ball valves for petroleum, petrochemical and allied industries
ISO 14313 Petroleum and natural gas industries, pipeline transportation systems, pipeline valves
ENSAYO E INSPECCIÓN:
API 6D: Pipeline Valves. Pressure Test Specification.
API 598: Valve Inspection and Testing.
API-607: Fire Test for Soft-seated Quarter-turn Valves
ISO 15848: Industrial Valves – Measurement, test and qualification procedures for fugitive emissions.
API RP 6FA: Specification for Fire Test for Valves
DIMENSIÓN DE BRIDAS:
ASME B 16.5: Pipe Flanges and Flanged Fittings.
ASME B16.47: large diameter steel flanges: nps 26 through nps 60
MSS SP 44: Steel pipeline flanges
EXTREMOS SOLDADOS O ROSCADOS:
ASME B16.25: Buttwelding ends
ASMEB16.11: Forged fittings, socket-welding and threaded
ASME B1.20.1: Pipe threads general purpose
DISTANCIA ENTRE CARAS:
ASME B 16.10: Face-to-Face and End-to-End Dimensions of Valves.
API 6D: Pipeline Valves. Pressure Test Specification
* Otras normas/materiales bajo consulta